One-for-all ONE FOR ALL User Manual download pdf

OVERVIEW

Thank you for purchasing the One For All

Cinema 5

™

uni-

versal remote control with learning. Along with being a com-

plete Home Theater universal remote, the Cinema 5’s

sophisticated technology will allow you to finally consolidate

the clutter of all of the original remotes in your home enter-

tainment system. Through patented learning technology, you

can teach your Cinema 5 the unique features of your original

remotes and create the complete universal remote control –

only from One For All.

Before you can use your new remote control, you will need

to program it to operate the specific home entertainment

components you wish to control. Follow the instructions

detailed in this manual to set up your Cinema 5 and enjoy

your new remote control.

FEATURES AND FUNCTIONS

The illustration below and the chart on the next three pages

describe the features and functions of the Cinema 5 univer-

sal remote control. Use the drawing to locate each feature of

the remote, then refer to the chart for a description of what

function each feature performs.

FEATURE - FUNCTION

The Light (LED) flashes red to show

that the remote is working and is sending a signal.

The SETUP key is used to program your

Cinema 5.

The POWER key controls power ON and OFF the

same as the POWER key on your original remote.

Please note that most CD Players do not have an

ON/OFF function on the original remote control. If

this is the case with your CD Player, then POWER

will have no effect on your CD Player.

The TV, VCR, CBL/SAT, DVD/LD or RCVR keys

are used to select the home entertainment compo-

nent you want to control. If your component does

not respond when you press a key on the remote

control, press the appropriate device key (TV,

VCR, CBL/SAT, DVD/LD or RCVR) first to tell the

remote control which component you would like

the remote to operate.

The VOL (Volume Up), VOL (Volume Down)

and MUTE keys control the volume the same as

the Volume Up and Down and Mute keys on your

original remote.

The CH (Channel Up) and CH (Channel

Down) keys change channels the same as the

Channel Up and Down keys on your original

remote. The CH / keys also control the fol-

lowing functions in other modes: DVD/LD

mode = Skip Forward/ Skip Reverse, RCVR, AUX

and CD mode = Preset Up/Preset Down.

The Digit keys (0-9) control direct channel access

the same as the Digit keys on your original

remote. The Digit keys (0-9) may also control the

following functions in other modes: RCVR and

AUX modes = Input Selections.

The ENTER key operates the same as the Enter

key on your original remote. If your original remote

control required you to use an Enter key to change

channels, use the ENTER key on the Cinema 5

after entering your channel number. The ENTER

key may also control the following functions in

other modes: RCVR and AUX modes = TAPE

MON.

The PREV CH (Previous Channel) key operates

the same as the Last Channel or Recall key on

your original remote. The PREV CH key may also

control the following functions in other modes:

DVD/LD, RCVR and CD mode = Random.

The CH ▲ / ▼, VOL ▲ / ▼, MUTE, PREV CH

and Digit (0-9) keys are made of a phosphores-

cent material that glows-in-the-dark. Expose the

keys to bright light to activate the glow-in-the-dark

feature. The length of time the keys remain illumi-

nated will be determined by the length of time the

remote is exposed to bright light.

SET

RCVR

DVD/LD

CBL/SAT

URC 5800

Cinema 5+

User Guide

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - User Guide

OVERVIEWThank you for purchasing the One For All®Cinema 5™uni-versal remote control with learning. Along with being a com-plete Home Theater universal

Page 2

Setup Codes For MiniDiscDenon 0873JVC 0826, 0681Onkyo 0868Sharp 0861Sony 0490Setup Codes For Video AccessoriesArcher 0160GC Electronics 0160Jebsee 016

Page 3

volume. If you would like to change the Volume Lock setting tothe VCR, DVD/LD or CBL/SAT modes repeat steps 1-3, onlysubstitute the appropriate device

Page 4

Surround on Sonyreceiver will not turn on?Sony receiver willturn off but not back on?Audio componentnot fully-opera-tional?Mini-system, book-shelf, or

Page 5

The SLEEP key accesses the Sleep Timer of yourhome entertainment components (TV, CBL/SAT,RCVR and AUX modes only). Even if your compo-nent does not ha

Page 6

Locate the brand name of your TV in the “Setup Codes ForTVs” section (starting on the next page), and write it in thespace below.TV Brand:____________

Page 7

Samsung 0060, 0019, 0030, 0056, 0178, 0039Samsux 0039Sansei 0451Sanyo 0154, 0159Scimitsu 0019Scotch 0178Scott 0236, 0019, 0178, 0179, 0180Sears 0047,

Page 8

Programming the Cinema 5 to operate your TV/VCRCombo:Locate the brand name of your TV/ VCR Combo in the“Setup Codes For TV/ VCR Combos” section (start

Page 9

NOTE: If your TV/VCR works with one of the above codeshighlighted with an asterisk (*), you may need to program aseparate TV code to control the volum

Page 10

Toshiba 0000Tusa 0015TV86 0063Unika 0153, 0022, 0207United Artists 0007United Cable 0003Universal 0153, 0022, 0056, 0191, 0207Videoway 0250Viewstar 00

Page 11

Remember, to use your Cinema 5 to operate yourReceiver/Tuner, press the RCVR key first.Setup Codes For Receivers/TunersADC 0531Akai 0076Aiwa 0121, 015

Page 12

NOTE: Please have your original remote controls handy beforeperforming learning on the Cinema 5.1. Press and hold SETUP until the Cinema 5’s redlight