One-for-all URC-6131 User Manual download pdf (Page 8)

SEARCHING FOR YOUR CODE

If your device does not respond to the remote control after trying all codes

listed for your brand,or if your brand is not listed at all, try searching for

your code.

NOTE: Before performing a code search for a DVD player or a VCR,turn on the device and

insert the required media.

For example, to search for a code for your TV:

1. On the remote control,press

TV once.

2. Press and hold

SET until the LED (red light) blinks twice,

then release SET.

3. Enter

9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the TV and slowly alternate

between pressing

POWER and TV.Stop when the TV turns

off (after pressing POWER).If the device does not have a

Power key,you can substitute another function, such as

digits

0 ~ 9 , CH +,or PLAY).

NOTE: In the search mode,the remote control will send IR codes from

its library to the selected device, starting with the most popular code

first.

5. To lock in the code,press and release SET.The LED will blink

twice.

6. To search for the codes of your other devices,repeat steps

1 through 5,but substitute the appropriate device key for

the device you are searching for.

CHECKING THE CODES

If you have set up the remote control using the Searching ForYour Code pro-

cedure (as above),you may need to find out which four-digit code is operat-

ing your equipment.For example,tofind out which code is operating your

TV:

1. On the remote control,press

TV once.

2. Press and hold

SET until the LED (red light) blinks twice,

then release SET.

3. Enter

9 - 9 - 0.The LED will blink twice.

4. To view the code for the first digit,press

1 once.Wait 3

seconds,count the

LED blinks (e.g.,three blinks = 3) and

write down the number in the leftmost box in the TV

code boxes on page 8.

NOTE: If a code digit is“0”,the LED will not blink.

URC4220 manual booklet:WALLB4P manual booklet 4/13/09 3:47 PM Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comments to this Manuals

No comments

One-for-all URC-6131 User Manual Page 8

Comments to this Manuals

Related products and manuals for Remote control One-for-all URC-6131